Learn Quickest and Simplest Steps on How to Setup TP-Link AV600 Powerline Adapter

Powerline adapters are known as the cheapest and easiest method to create a wired network throughout the home or office having the WiFi capability. Have you purchased a new TP-Link av600 powerline adapter? Facing trouble in the powerline adapter setup? Well, TP-Link av600 powerline adapter is the amazing device through which you can get the strong WiFi signals in every corner and floor of your home and office. Same as other power line kits, it has two adapters. You have to plug one of them into the wall socket and the other one connects through the Ethernet cable to the wireless router. It will help in broadcasting the wireless signals upstairs. If you are searching for the instructions on “How to Setup TP-Link AV600 Powerline Adapter” then you do not need to go anywhere else. In this blog, we have shared the instructions on the setup of the TP-Link av600. Let’s go ahead with it. 

Steps to Setup TP-Link AV600 Powerline Adapter

Follow the below steps for the TP-Link AV600 Powerline Adapter setup on your device. You need to go through the below steps carefully: 

Step 1: The first step is to plug in the base of your TP-Link av600 powerline adapter and make sure to place it closer to the wireless router.

Step 2: Take an Ethernet cable. After that, connect one end of the Ethernet cable to the LAN port of your router and the other end to the base unit. 

Note: You need to ensure that you have not plugged in the TP-Link av600 power adapter into the power socket, extension cord or surge protector. It is suggested to use the Ethernet cables that come along with your powerline adapter. 

Step 3: Thereafter, plug in the Remote unit in the appropriate area.

Step 4: Next, download the Nighthawk app on your computer or laptop whatever you are using on which you need to access the WiFi connection. 

Step 5: Now, you have to wait for some time until your device becomes stable.

Step 6: In the next step, push the PAIR button located on the base unit.

Step 7: Within the 60 seconds, you need to push the PAIR button on the “Remote” unit. 

Step 8: Wait for 15-20 seconds until the LED light starts flashing on your device.

Step 9: After the confirmation, you need to connect the Ethernet cable to your device from the “Remote Unit” like computer, laptop, Playstation etc. By this way, you can access the high-speed internet connection. 

Step 10: Plugin the TP-Link av600 powerline adapter and play the devices. Follow on-screen instructions to complete the TP-Link AV600 Powerline Adapter setup. 

Step 11: Press and hold the PAIR button for some time to leave the existing powerline network. If you wish to reset the powerline adapter to factory default then press and hold the power button for 15-20 seconds. 

With these instructions, you will get to know “How to Setup TP-Link AV600 Powerline Adapter” on your device. In case of any doubt, you can contact our professional support team for resolution of the issue in your finger-tips.